Brandt Organics Ag Aide - 1 Gallon (4/Cs) (192/Plt)

BRANDT ORGANICS AG AIDE is a natural, non-ionic surfactant that enhances the activity and performance of pesticides and foliar nutrients. When applied foliarly, this product provides rapid wetting and improves absorption of the spray solution. When applied to the soil, the product increases water penetration and improves wetting of hydrophobic soils.
This product may be used on agricultural, aquatic, forestry, turf and ornamental, industrial, and noncropland sites. NOT

FOR AQUATIC USE IN WASHINGTON.

Read and follow the precautions, restrictions and recommendations on the labels of pesticides used with this product. Use according to the most restrictive label directions for each product in any tank mix.

COMPATIBILITY: BRANDT ORGANICS AG AIDE is compatible with most pesticides. However, if the desired combination has not been previously used, a compatibility test is recommended.

混合:抖逢l before using. Fill spray tank 2/3 to 3/4 full of water and begin agitation. To prevent or minimize foaming, add anti-foaming agent to the spray tank before adding other tank mix components. Add this product at agitation level with paddles turning and then follow with other ingredients as directed by label or in the following sequence and continue filling tank: (1) Dry flowables or water dispersing granules, (2) Wettable powders, (3) Flowables, (4) Solutions, (5) Emulsifiable concentrates. Minimize agitation and add the recommended amount of
BRANDT ORGANICS AG AIDE and mix for 1 to 2 minutes. Continue filling tank maintaining minimal agitation. Continuous agitation of finished spray is recommended. If spray solution has been allowed to stand, thoroughly
agitate and remix before application.

RECOMMENDATIONS: Specific use rates will vary with conditions of application such as water hardness, application method, equipment, spray droplet size, condition of foliage, etc. Also, higher rates than those below may be used if recommended by pesticide labeling. Follow pesticide label directions. However, do not add this product at a rate which exceeds 5% of the finished spray volume.

Soil Application: For normal soils: Use 1 pint per acre. For compacted soils: Use 2 pints per acre. For compacted soils or for water penetration problems, use 2 pints per acre on first application. Repeat application at 1 pint rate if needed.

Row Crops: Meter into the first irrigation water or mix with starter or side dress fertilizer.

Trees and Vines: Meter into the first irrigation water for drip irrigation system or, if drip irrigation is not used, dilute in sufficient water for coverage and spray soil surface to be irrigated. Transplants: Mix with transplant water.

Foliar Application: Use 4-16 fl. oz. per 100 gallons of finished spray
solution. For improved efficacy, use at least 8 fl.oz. per acre when finished spray volume is less than 20 gallons per acre. For backpack or hand held sprayers, use 1/3 to 1 1/4 fl.oz. per gallon of finished spray solution.