Netafim Series 80 Nylon Control 2-Way Valves (Solenoid)
Availability: In stock
Only%1left
Currently, there are no documents available for this product.
Specifications
2-WAY SERIES 80 VALVES
Specifications
- Recommended Flow Ranges:
3/4″ valve – .01 to 26 GPM
1″ valve – .01 to 44 GPM
1 1/2″ valve – .25 to 110 GPM
2″ valve – .25 to 176 GPM - Valve Configurations:
3/4″ and 1″ valves – Globe
1 1/2″ and 2″ valves – Globe or Angle - Standard 2-Way Electric Normally Closed Valve
- 最低工作压力:7 psi
- Maximum Operating Pressure: 150 psi
- Maximum Water Temperature: 140° F
- 标准电磁电压:电压24伏交流电±10%
- Solenoid Inrush Current: .22A
- Solenoid Holding Current: .095A
- Optional Solenoid Voltage: 24VDC, 12VDC, 12VDC latching, 120VAC
Materials
- Body, Bonnet, Diaphragm Seat: Glass Reinforced Polyamide (GRP)
- Nuts, Bolts, Washers: Stainless Steel 304
- Spring: Stainless Steel AISI 302
-
WNE101 Netafim Series 80 Nylon Control 2-Way Valves - 1-Inch Globe - 24VAC (44 GPM Max) -
WNE103 Netafim Series 80 Globe Valve w/ Flow Control - 176 GPM Max - 24VAC - 2-Inch Globe
Details
Series 80 Control Valves have quick reaction and drip tight closure for precise and accurate irrigation. The exceptionally low inrush and holding currents allow longer wire runs from valve to controller saving installation time and money. Made from durable and corrosion-resistant nylon materials, the simple design means quick installation with minimal maintenance. Now available in both 2-Way and 3-Way options.
PRODUCT ADVANTAGES
- Flow control stem allows manual control from full closure up to maximum capacity.
- Suitable for dirty water applications with clog-free labyrinth inlet for command water.
- Quick reaction to opening and closing and a drip-tight seal for accurate irrigation.
- Available in multiple body configurations and control functions.
- Very low friction loss allows valve use with a wider range of flows.
- Durable, corrosion-resistant materials for long life.
2-WAY SERIES 80 VALVE FEATURES
- Suitable for high-pressure applications with quick reaction to opening and closing.
- Exceptionally low inrush and holding current allows the longest wire run from valve to controller.
- Tight sealing valve with a fully supported diaphragm.
- Stable solenoid to voltage fluctuations with low sensitivity to dirt – no diode solenoid.
- Integrated check valve (1 1/2″ and 2″ sizes) ensures valve remains closed until the controller designates opening.
- Optimal for vertical installations.
2-WAY SERIES 80 VALVE APPLICATIONS
- For mild corrosive and mild acidity levels in the water
- For remote control, master valve, automated or manual operations
- Greenhouse and Nursery irrigation including hydroponic and mist systems