Ejector Style Hole Punch Tool
Availability: In stock
Only%1left
Title
Action
-
WAQ372 Aquagation Coupling Control Valve - TwistLock x TwistLock - 20mm Series 800 (Bag of 25) (6 Bags/Cs) -
WAQ390 Aquagation Pressure Gauge PE Tubing Adapter Fitting - 3/4-Inch Female Hose Thread x 1/4-Inch Female Pipe Thread (100/Bag) (10 Bags/Cs)
-
WAQ306 Aquagation TwistLock Male Adapter - 3/4-Inch MPT x TwistLock - 18mm Series 600 (Bag of 100) (9 Bags/Cs) -
WAQ307 Aquagation TwistLock Male Adapter - 3/4-Inch MPT x TwistLock - 20mm Series 700 (Bag of 100) (8 Bags/Cs)
Details
Aquagation Ejector Style Hole Punch Tools feature a spring-loaded ejector lever and ergonomic grip for comfortable hand-held usage and mobility while punching PE tubing.
Punch tool is designed to make holes 2.5mm in diameter in a soft polyethylene pipe in order to insert drippers, sprinklers, junctions, stop valves or other units.
Instructions for Use
- Place tubing onto a stable surface
- Place the punch cutting edge along the tubing and push
- You may need to lightly twist the punch to cut through the tube
- Once you create the hole, press the spring-loaded ejector lever to clear any debris from the punch tip opening
- Change the tip if burrs appear or if the cutting edge gets dull
Designed with reliability and versatility in mind. These tools make creating your custom irrigation system easy.