Rigid PVC Pipe - Schedule 40 - White - Bell End

Rigid PVC Pipe is commonly used for irrigation installations, drainage, HVAC, and dehumidification. Our pipe is MADE IN AMERICA and can be sold in increments of 20-feet. Discounts for full skids and full truckloads are available. We offer free shipping to some locations based on volume.

PVC pipe is produced for use in both the pressure and DWV applications in which the maximum operating temperature is 140°F. The compound is PVC 1120 Type 1 Grade 1, with a cell class of 12454B, per ASTM D1784.

Each one of the categories of our Schedule series is produced in strict compliance to ASTM D1785. It is listed with NSF and complies with NSF/ANSI Standard 14 and Standard 61. The Sch40 White pipe is dual marked, so it can be used both for Pressure and DWV applications. The dual marked pipe conforms to ASTM D1785 and ASTM D2665.

每ASTM D2855 Sch40管安装。关节should conform to ASTM D2672, the solvent cement to ASTM D2564 and the primer to ASTM F656.

Our Schedule series of PVC pipe is produced in the following categories:

• White ASTM D1785 & ASTM D2665
• Sch40 for use in pressure and DWV applications
• Sizes 1/2″ – 12″ are produced in White color, 20 foot lengths and Belled End
• Sizes 1/2″, 3/4″, 1″ are marked for pressure applications
• Sizes 1¼”-12″ are dual marked for pressure and DWV applications
• Sizes 1/2″ – 2″ are also produced in 10 foot lengths Plain / Belled End
• The pipe is Dual marked with ASTM D1785 for use in potable water applications and with ASTM D2665 for use in the DWV applications.

OD– Outside Diameter
T– Wall Thickness
C– Approximate Bell Depth
PSI– Pressure Rating

This is to certify that, in this category of PVC pipe, all the products manufactured by Pacific Plastics have been inspected, sampled and tested in accordance with the following specifications and have been found to meet or exceed the requirements of those specifications.

Raw Materials

• PVC1120 Type1 Grade1
• Cell Class 12454
• ASTM D1784 Specifi cation for Rigid PVC Compounds
• NSF Listed

PVC Pipe

• Sch80 Grey
• Solvent Weld Plain End
• ½” – 12” IPS
• ASTM D1785 Specifi cation for PVC Pipe
• ASTM D2672 Specifi cation for IPS PVC Pipe Joints using solvent sement
• Complies with NSF/ANSI Standard 14
• Complies with NSF/ANSI Standard 61